VRH (Variable Ride Height) System for Onewheel GT™ (PREORDER: Shipping by the end of July)
Craft&Ride is proud to partner with Land-Surf to introduce nine premium accessories, including the VRH System for Onewheel GT, to the Craft&Ride family of innovative products.
Lifetime Warranty: This product is backed by the Craft&Ride Lifetime Warranty.
The Craft&Ride Community: See what thousands of other riders are saying about our accessories here.
Want to enter to win a Onewheel GT? Every order that uses the code WIN at checkout by June 20th 11:59 PM PT will be entered to win a brand new Onewheel GT ($2,750+ value)! No purchase is necessary to enter to win. Click here for the complete rules of the Craft&Ride Spring/Summer Giveaway.
The VRH System for Onewheel GT is the easiest and quickest way to adjust the ride height on your Onewheel GT stock rails.
Using the VRH System, you can change your ride height to any one of 7 positions, with each position moving the board up or down by around 7mm, in less than a minute. The axle is never fully disconnected from the board, so changes are easy and fast. The system drops the Onewheel rails up to 1.25" down, and about .25" up from stock.
Riding to a trail via the streets? Drop your ride height for the smooth pavement and then quickly raise it to stock or one step higher for the trails! The VRH System ensures fast adjustment and easy dial in every time.
With the VRH system can you precisely dial in any ride height for the terrain while out on a ride and changing to a new setting takes less than one minute and only 2 screws. No other ride height adjustment product comes close to this.
The second hole from the top corresponds to stock ride height. From there you can go up slightly (the top hole), or progressively lower the board over 5 stops (the lower holes) for a full drop of about 1.25" from the stock height at the last setting.
Made from 7075 T6 aluminum for super strength, and then anodized, the VRH not only functions like no other axle carrier, but also looks good doing it! Logos are laser etched, not silkscreened, so they can’t rub off.
A set of 4 custom-made, stainless-steel high strength screws attach the VRH inner brackets directly to the frame, and installation takes only 10-15 minutes. For ease of use, all of the screws on the VRH system are M8 threaded and use the same size 5mm hex drive.
Videos:
Compatibility:
| Model | Compatible |
| Onewheel GT | Yes |
| Onewheel+ XR | No |
| Onewheel Pint X | No |
| Onewheel Pint | No |
| Onewheel+ | No |
| Original Onewheel | No |
The VRH System is compatible with the Onewheel GT. The VRH System is not compatible with the Onewheel+ XR, Onewheel Pint X, Onewheel Pint, Onewheel+, and original Onewheel.
The VRH System is designed to be compatible with stock Onewheel GT rails, but may work on other rails that can use the stock axle carriers.
The VRH System is compatible with Stone Cold Chillers.
The VRH System is compatible with Float Life Savers, but Float Life Savers must be removed first to install the VRH System.
The VRH System is compatible with the SilverHandle.
The VRH System is not compatible with the Maghandle.
Please note: Fenders and fender deletes will need to be trimmed or dremmeled (sanded) in order to clear the swingarm and adjuster bolts. We cut the fender deletes at an angle on a miter saw and put them on.
This product comes with:
- One VRH System for Onewheel GT
- Installation hardware
- Craft&Ride Stickers (Please leave an order note with which stickers you would specifically like and we will include them if they are in stock!)
