Light Guards for Onewheel™
Light Guards, by CarvePower, are the latest and greatest upgrade for the rails of your Onewheel! Light up the night and protect the rails of your Onewheel all at once with Light Guards.
Light up:
Light Guards are electronically powered light-up guards for the rails of your Onewheel! They produce amazing patterns of light during the night. Stand out and be noticed with Light Guards.
3 models:
Light Guards are available in 3 colors. You can choose from Red, White, or Blue. Each color has the identical 6 light-up modes. When your Light Guards aren't powered on, they retain their color. Your rails will remain Red, White, or Blue, regardless of whether you have your Light Guards on or off!
6 modes:
Each color of Light Guards produces the same 6 light-up modes. Each mode produces a different light-up pattern. Watch a video of the modes below!
Mode 1: Every set of Light Guards is sound sensitive! In Mode 1, your Light Guards will react to the sound around them. Play music or chat with friends and your Light Guards will display a pattern that fluctuates with the level of noise around them.
Mode 2: Your Light Guards will fluctuate from their solid color to display arrows of growing size!
Mode 3: Your Light Guards will fluctuate from their solid color to display arrows of growing size at a slower speed!
Mode 4: Your Light Guards will display moving arrows that begin at the center of the rail and gradually move out towards the end of the rail!
Mode 5: Your Light Guards will display their solid color at full brightness!
Mode 6: Your Light Guards will blink between their solid color at full brightness to no light.
Protect your investment:
Light Guards also protect the sides of the rails of your Onewheel! Your aluminum Onewheel rails are prone to scratches and other forms of damage from everyday ride that can be prevented with Light Guards.
Light Guards come with 2 pieces (1 piece for each side of the rails). Light Guards do not come with top and bottom pieces. We recommend purchasing a set of Float Sidekicks to complete the coverage of your rails.
How are they powered?
Each set of Light Guards comes with 2 inverters. Each inverter powers one rail (Light Guard) of the Onewheel.
The inverter is a small power supply that is installed near the hub of the Onewheel using velcro. The inverters are discrete and take up minimal space once installed.
The Light Guards connect to the inverters with minimal wiring that is placed behind the rails of your Onewheel.
How are they installed?
NOTICE: It is extremely important that you watch our installation video before you proceed to install your Light Guards.
Light Guards are not difficult to install! Light Guards are applied to the rails of your Onewheel using their preinstalled adhesive backing. The inverter (power supply) is installed near the hub of the Onewheel using the provided Velcro. The Light Guards are then connected to the inverter. Power on, and you're ready to light up the night.
Battery life and charge time:
Light Guards will last for approximately 2.5 hours powered on. That's enough charge for a few full rides with your Onewheel! It takes about 2 hours to fully charge your Light Guards with the provided USB cables. You can turn your Light Guards on and off with the power switch on each of the inverters.
Are they waterproof?
Light Guards are not waterproof. Do not ride in or around water with your Light Guards! They will not work if they are exposed to water. They are not covered under warranty for water damage.
Warranty & Returns:
Light Guards come with a 90-day warranty that covers defective hardware. The warranty does not cover physical damage or water damage.
Light Guards can be returned if they have not been installed or used within 30 days from the date of purchase.
Compatibility:
| Model | Compatible |
| Onewheel+ XR | Yes |
| Onewheel Pint | No |
| Onewheel+ | Yes |
| Original Onewheel | Yes |
Light Guards are compatible with the Onewheel+ XR, Onewheel+, and original Onewheel. Light Guards are not compatible with the Onewheel Pint.
Light Guards are compatible with the SilverHandle.
To use Light Guards with the Craft&Ride Trunk Stand, simply disconnect the inverters and place your Onewheel in the stand.
This product comes with:
- One set of Light Guards (2 pieces for the sides of your rails)
- 2 inverters to power your Light Guards (including Velcro)
- 2 USB cables to charge your Light Guards
- Craft&Ride and Light Guards Stickers
Craft&Ride Loadouts:
To better provide you with customization ideas and new perspectives of our accessories, we've created a page called Craft&Ride Loadouts! Check out complete Onewheel builds here for inspiration and leave a suggestion for future Craft&Ride Loadouts.
