Burris Ceramic Hybrid Bearings for Onewheel™ (Set of 2)
Burris Ceramic Hybrid Bearings (2RS 35mm x 55mm x 10mm) for Onewheel™ are an affordable upgrade to the bearings of your Onewheel. Swap out your stock Onewheel bearings for the Burris Ceramic Hybrid Bearings for a swifter ride.
Burris Ceramic Hybrid Bearings are manufactured with steel races and ceramic balls. Rubber seals also line each bearing to increase durability within environments. These high quality low drag seals are fully seated after a few minutes and need no further attention.
Set of 2:
Your Onewheel requires two bearings to complete a full bearings swap, so we offer the Burris Ceramic Hybrid Bearings automatically as a set. You only need to purchase 1 unit of this product to change both bearings of your Onewheel.
Burris Ceramic Hybrid Bearings are compatible with the Onewheel+ XR, Onewheel Pint, and Onewheel+. Burris Ceramic Hybrid Bearings are not compatible with the Original Onewheel.
This product comes with:
- Set of 2 Burris Ceramic Hybrid Bearings for Onewheel™
- Burris and Craft&Ride Stickers (Please leave an order note with which stickers you would specifically like and we will include them if they are in stock!)
Super smooth compared to stock. Fantastic upgrade between tire changes.
My old bearings were shot and these ones have been great so far. No noise and smooth.
Fitted new bearings to my XR. Got 8% of range back. They look like they are good units.
Craft and Ride should be selling or including a new set of O-rings in the deal.....Going to a bearing shop to buy 2 x o-rings is embarrassing. Bulk order them CnR then chuck a set in with all bearings sold.
Thank you for the order! Received really quick, communication was spot on, quality products!
Today I rode 17.9 miles, crossed overpass, up hill. Ended up with 27% on my battery. Very happy
These guys are on top of it. I got my order way faster than I thought I would. Especially during covid. Hand written thank you on the receipt. Rare touch and excellent customer service. Too notch. Highly recommend!
These bearings are great! One fateful day I spent the evening riding through muddy trails and deep puddles. A few days later when I got on the OneWheel again and the bearings were definitely "whirring". My OneWheel XR was at 1010 miles, so I figured it's probably time to replace the bearings anyway.
The repair was very straightforward. I had access to a hydraulic press; this will be more involved if you don't have one.
If you do this yourself, note that you will likely have to replace the o-rings (red in the attached image). They are unlikely to be in a standard o-ring kit. I used twisted Teflon to replace the brittle dried out o-rings and it seems to seal well. Just make sure that the seal is "proud". (Would be sweet if a replacement was offered on Craft&Ride as well!)
Replacing your bearings is a regular maintenance item. Make sure to do these every once in a while to keep the wheel rolling smoothly!
Outer bearing race is 55mm.
Craft&Ride, as always, is prompt, pleasant and easy to work with.