Craft&Ride Blackout Paint Marker
If you’ve ever wanted to black out your foot pads, the Craft&Ride Blackout Paint Marker is the perfect premium matte black paint marker for you.
How to black out your front stock foot pad:
This marker does not require you to remove, tamper, or interfere with the sensor on your front stock foot pad. You will simply sand down the wood surrounding your sensor in order to paint it perfectly, without the need to come into contact with your sensor.
Use 80 grit sand paper to sand by hand and remove the finish on the top and sides of your front stock foot pad without coming in contact with your sensor. Then, use 120 grit sand paper or finer for an even smoother surface. If you are using a power sander, only the 120 grit sand paper or finer will be enough. Clean off the sanded surface of your front stock foot pad with a rag before using the paint marker.
The paint marker should be shaken well for 30-60 seconds. After taking the cap off, press down on the tip to allow the paint to come to the surface of the tip.
This product comes with:
- One Craft&Ride Blackout Marker
- Craft&Ride Blackout Stickers (Please leave an order note with which stickers you would specifically like and we will include them if they are in stock!)
