OneTail Extreme Concave Foot Pad for Onewheel™
Win a brand new Onewheel+ XR and a $500 Craft&Ride Shopping Spree: Every order that uses the code "WIN" at checkout from today until June 30th, 2021, at 11:59PM PDT, will be entered to win. No purchase is necessary. Read the full details and rules here.
The OneTail Extreme is the newest addition to Craft&Ride's lineup of concave foot pads for Onewheel. It is the product of 3 years of constant development. Craft&Ride has continuously improved the OneTail line through iterations of the OneTail+ and OneTail Classic. The culmination of this constant development and series of improvements has now been packaged into Craft&Ride's ultimate foot pad, the OneTail Extreme.
The OneTail Extreme makes an incredible experience even better by replacing the existing flat rear stock foot pad with a concave foot pad. The OneTail Extreme is only designed to replace the rear stock foot pad of the Onewheel, not the front stock foot pad.
The OneTail Extreme has 2X the concave of all other concave foot pads on the market. Not only does the OneTail Extreme have the most side-to-side concave out of all foot pads, it also has the perfect amount of kick to keep your foot locked in during every ride. We've also designed a heel pocket at the edge of the foot pad between the side and kick to rest your heel into while you ride.
The OneTail Extreme is equipped with our all new Craft&Ride Grip Tape.
With this new addition, in combination with the OneTail Extreme's concave shape, the OneTail Extreme relieves foot fatigue by allowing your foot to work less and ride more. Your toes and heel now do all of the work against the concave shape of the OneTail Extreme, not your entire foot and leg. This relieves the foot fatigue you experience with the stock foot pad. Carve (ride in an S-shape trajectory) with your OneTail Extreme for the greatest reduction in foot fatigue. Your foot rests comfortably in the OneTail Extreme's deep spoon-like pocket and is supported by the low grit of Craft&Ride Grip Tape.
The OneTail Extreme introduces a level of control and responsiveness that will change your experience forever.
The combination of Craft&Ride Grip Tape, extreme side-to-side concave, and extreme kick creates a newfound control that will change the way riders push the Onewheel sport forward. Your foot will be locked into the OneTail Extreme's deep pocket and you will be in control of your Onewheel like never before!
Craft&Ride Grip Tape:
The OneTail Extreme is equipped with Craft&Ride Grip Tape. Craft&Ride Grip Tape is in a league of its own. With our low grit proprietary formula, we've perfectly spaced rock-like granules to provide just the right amount of space for the grooves of your shoes to stay locked in, without sacrificing the ability to adjust your feet. Our low grit design is everything you need beneath your feet. Read more about Craft&Ride Grip Tape here.
The OneTail Extreme Blackout Kit is now available at no extra charge. If you’ve ever wanted to black out your foot pads, this is the perfect kit for you. Simply select "Yes" under the "Blackout Kit" drop-down menu to receive this kit.
The Blackout Kit includes:
- OneTail Extreme in Black (pre-painted)
- Craft&Ride Grip Tape for your front foot pad
- Craft&Ride Blackout Marker
- Craft&Ride and C&R Blackout Stickers
This Blackout Kit does not require you to remove, tamper, or interfere with the sensor on your front stock foot pad. You will simply sand down the wood surrounding your sensor in order to paint it perfectly, without the need to come into contact with your sensor.
How to black out your front stock foot pad:
Use 80 grit sand paper to sand by hand and remove the finish on the top and sides of your front stock foot pad without coming in contact with your sensor. Then, use 120 grit sand paper or finer for an even smoother surface. If you are using a power sander, only the 120 grit sand paper or finer will be enough. Clean off the sanded surface of your front stock foot pad with a rag before using the paint marker.
The paint marker should be shaken well for 30-60 seconds. After taking the cap off, press down on the tip to allow the paint to come to the surface of the tip.
How it's made:
Every OneTail Extreme features unique hard maple wood that is pressed, CNC’d, hand-beveled, stained, and sealed in our California factory. Every OneTail Extreme is completed with our Craft&Ride Grip Tape, and we didn’t forget about the rest of your Onewheel. Every OneTail Extreme comes with an extra piece of Craft&Ride Grip Tape for your front foot pad! Now your entire Onewheel is freshly gripped.
This version of the OneTail Extreme Concave Foot Pad is compatible with the Onewheel+ XR and Onewheel+. This version of the OneTail Extreme Concave Foot Pad is not compatible with the Onewheel Pint or the original Onewheel.
*The OneTail Extreme Concave Foot Pad is compatible with the original Onewheel if you have Onewheel+ bumpers installed.
The OneTail Extreme is designed with the Flight Fender and Flight Fins in mind! The OneTail Extreme has the most side-to-side concave inside the Flight Fins footing region. There is no other foot pad on the market that benefits Flight Fins riders like the OneTail Extreme.
The OneTail Extreme is available in 2 versions.
The first version is compatible with all fenders (including all Craft&Ride fenders), except the Flight Fender. This version is not compatible with the Flight Fender. To purchase this version of the OneTail Extreme, select "Compatible with Flight Fender: No."
The second version is compatible with all fenders (including all Craft&Ride fenders) and the Flight Fender. This version is compatible with the Flight Fender. To purchase this version of the OneTail Extreme, select "Compatible with Flight Fender: Yes."
This product comes with:
- One OneTail Extreme equipped with Craft&Ride Grip Tape
- One piece of Craft&Ride Grip Tape for your front foot pad
- Installation hardware
- Craft&Ride Stickers (Please leave an order note with which stickers you would specifically like and we will include them if they are in stock!)
Not only you have full control of your board making it so easy to turn but it looks great matches your front pad and keeps that wooden skateboard look I love it
There isn't much place in Canada that has a supply for onewheel so it awesome to shop here, that ship to Canada
Nick is great! Answered my question on what to give as a gift. The receiver of the gift loved it and would never have picked on his own. Delivery came super quick. Have used and returned items to Nick and Craft & Ride before. Customer service is top notch and so easy to work with. I always buy accessories from Craft & Ride instead of going to OneWheel directly.
So I got my onetail extreme on my onewheel today. And...........I won't lie. I'm not too happy. With myself for not ordering it sooner. I used to get calf cramps and numb toes on my rear leg. Not anymore. Not only do I have more comfort while riding I have more control. Absolute must have for long distance carving riders. Not to mention the grip tape is solid. No slip issues at all. Also got the blackout kit. Works great. Plain and simple. I really have no complaints. Few mins of foot placement adjustments. Then we were rolling perfect.
OneTail Extreme Concave Foot Pad for Onewheel™
The foot pad really help with foot fatigue and provided more control of the onewheel. The grip tape is very grippy as well. The only con I have is the fitting. The pad is slightly smaller and does not sit flush to the edge of the rails.
The shipping was fast, the product was excellent and dude even hand signed a “thank you” on my receipt. Oh, and a bunch of cool stickers for free. That’s good service!!!!