OneTail Extreme Concave Foot Pad for Onewheel™
The OneTail Extreme is the newest addition to Craft&Ride's lineup of concave foot pads for Onewheel. It is the product of 3 years of constant development. Craft&Ride has continuously improved the OneTail line through iterations of the OneTail+ and OneTail Classic. The culmination of this constant development and series of improvements has now been packaged into Craft&Ride's ultimate foot pad, the OneTail Extreme.
Craft&Ride Foot Pad Trade-In Program:
Craft&Ride is proud to introduce the Craft&Ride Foot Pad Trade-In Program to give riders the opportunity to upgrade to a Craft&Ride foot pad and receive $50 in store credit by trading in their used non-Craft&Ride foot pad. The trade-in process is swift and easy. For full details, terms, and conditions, please click here.
The OneTail Extreme makes an incredible experience even better by replacing the existing flat rear stock foot pad with a concave foot pad. The OneTail Extreme is only designed to replace the rear stock foot pad of the Onewheel, not the front stock foot pad.
The OneTail Extreme has 2X the concave of all other concave foot pads on the market. Not only does the OneTail Extreme have the most side-to-side concave out of all foot pads, it also has the perfect amount of kick to keep your foot locked in during every ride. We've also designed a heel pocket at the edge of the foot pad between the side and kick to rest your heel into while you ride.
The OneTail Extreme is equipped with our all new Craft&Ride Grip Tape.
With this new addition, in combination with the OneTail Extreme's concave shape, the OneTail Extreme relieves foot fatigue by allowing your foot to work less and ride more. Your toes and heel now do all of the work against the concave shape of the OneTail Extreme, not your entire foot and leg. This relieves the foot fatigue you experience with the stock foot pad. Carve (ride in an S-shape trajectory) with your OneTail Extreme for the greatest reduction in foot fatigue. Your foot rests comfortably in the OneTail Extreme's deep spoon-like pocket and is supported by the low grit of Craft&Ride Grip Tape.
The OneTail Extreme introduces a level of control and responsiveness that will change your experience forever.
The combination of Craft&Ride Grip Tape, extreme side-to-side concave, and extreme kick creates a newfound control that will change the way riders push the Onewheel sport forward. Your foot will be locked into the OneTail Extreme's deep pocket and you will be in control of your Onewheel like never before!
Craft&Ride Grip Tape:
The OneTail Extreme is equipped with Craft&Ride Grip Tape. Craft&Ride Grip Tape is in a league of its own. With our low grit proprietary formula, we've perfectly spaced rock-like granules to provide just the right amount of space for the grooves of your shoes to stay locked in, without sacrificing the ability to adjust your feet. Our low grit design is everything you need beneath your feet. Read more about Craft&Ride Grip Tape here.
The OneTail Extreme Blackout Kit is now available at no extra charge. If you’ve ever wanted to black out your foot pads, this is the perfect kit for you. Simply select "Yes" under the "Blackout Kit" drop-down menu to receive this kit.
The Blackout Kit includes:
- OneTail Extreme in Black (pre-painted)
- Craft&Ride Grip Tape for your front foot pad
- Craft&Ride Blackout Marker
- Craft&Ride and C&R Blackout Stickers
This Blackout Kit does not require you to remove, tamper, or interfere with the sensor on your front stock foot pad. You will simply sand down the wood surrounding your sensor in order to paint it perfectly, without the need to come into contact with your sensor.
How to black out your front stock foot pad:
Use 80 grit sand paper to sand by hand and remove the finish on the top and sides of your front stock foot pad without coming in contact with your sensor. Then, use 120 grit sand paper or finer for an even smoother surface. If you are using a power sander, only the 120 grit sand paper or finer will be enough. Clean off the sanded surface of your front stock foot pad with a rag before using the paint marker.
The paint marker should be shaken well for 30-60 seconds. After taking the cap off, press down on the tip to allow the paint to come to the surface of the tip.
How it's made:
Every OneTail Extreme features unique hard maple wood that is pressed, CNC’d, hand-beveled, stained, and sealed in our California factory. Every OneTail Extreme is completed with our Craft&Ride Grip Tape, and we didn’t forget about the rest of your Onewheel. Every OneTail Extreme comes with an extra piece of Craft&Ride Grip Tape for your front foot pad! Now your entire Onewheel is freshly gripped.
|Onewheel Pint X||No|
This version of the OneTail Extreme Concave Foot Pad is compatible with the Onewheel+ XR and Onewheel+. This version of the OneTail Extreme Concave Foot Pad is not compatible with the Onewheel GT, Onewheel Pint X, Onewheel Pint, and original Onewheel.
*The OneTail Extreme Concave Foot Pad is compatible with the original Onewheel if you have Onewheel+ bumpers installed.
The OneTail Extreme is designed with the Flight Fender and Flight Fins in mind! The OneTail Extreme has the most side-to-side concave inside the Flight Fins footing region. There is no other foot pad on the market that benefits Flight Fins riders like the OneTail Extreme.
The OneTail Extreme is available in 2 versions.
The first version is compatible with all fenders (including all Craft&Ride fenders), except the Flight Fender. This version is not compatible with the Flight Fender. To purchase this version of the OneTail Extreme, select "Compatible with Flight Fender: No."
The second version is compatible with all fenders (including all Craft&Ride fenders) and the Flight Fender. This version is compatible with the Flight Fender. To purchase this version of the OneTail Extreme, select "Compatible with Flight Fender: Yes."
This product comes with:
- One OneTail Extreme equipped with Craft&Ride Grip Tape
- One piece of Craft&Ride Grip Tape for your front foot pad
- Installation hardware
- Craft&Ride Stickers (Please leave an order note with which stickers you would specifically like and we will include them if they are in stock!)
The build on this footpad is top notch. Adds the right amount of kick and the grip tape grips yet allows for subtle repositioning while riding. Thanks guys!
I saw the reviews saying this foot pad gives a "locked in" feeling and now I understand. Its night and day difference between the factory foot pad and Craft & Ride. Locked in really is the very best way to describe the feeling you get as soon as you step on. I dont know how I could ever have delt without it. Love this foot pad!
They’re amazing! The board has a grippier feel. Man, those grips are something else! Highly recommend.
This this is amazing! Way better than the original grip
In addition to the customer service, the foot pad and grip tape and huge improvements. Really improved my confidence and control! I made the switch after about a year and 650 miles of riding. Great stuff.
Customer service was amazing and the products are awesome
Really helps carving and feels more natural, maybe some padding would be sweet, but love the wood look. Would buy again easy